Shopping Cart
Your Cart is Empty
Quantity:
Subtotal
Taxes
Shipping
Total
There was an error with PayPalClick here to try again
CelebrateThank you for your business!You should be receiving an order confirmation from Paypal shortly.Exit Shopping Cart

​ Petersen Arms

Maker of fine Mortars and Cannons



Because Everyone Needs a Cannon

Coehorn Mortar/Dark Oak

Coehorn style Mortar. Ready to shoot! Golf ball size bore. The base is white oak, stained dark and has a spar urethane finish.  The base measures approximately  5.5” X 10.75” X 3” tall. (Base measurements may vary by a 1/2” on the width, depending on the wood that is available at the time of manufacture)The barrel is turned from solid 1018CRS 3” X 5.75” with a bore of 1.720” (golf ball)X 3.75” deep. There is a 1” x 1” powder pocket or breach with an 1/8 fuse hole. The barrel and all hardware is painted with flat black enamel.  Weighs 13lbs Made in USA!!!! Packs a good punch for a little mortar!

Coehorn Mortar/Dark Oak
$380.00

Coehorn Mortar/Natural Oak

Coehorn style Mortar. Ready to shoot! Golf ball size bore. The base is white oak, with no stain. Spar urethane finish to show natural color and beauty of the oak. The base measures approximately  5.5” X 10.75” X 3” tall. (Base measurements may vary by a 1/2” on the width, depending on the wood that is available at the time of manufacture)The barrel is turned from solid 1018CRS 3” X 5.75” with a bore of 1.720” (golf ball)X 3.75” deep. There is a 1” x 1” powder pocket or breach with an 1/8 fuse hole. The barrel and all hardware is painted with flat black enamel.  Weighs 13lbs Made in USA!!!! Packs a good punch for a little mortar!

Coehorn Mortar/Natural Oak
$380.00

Coehorn Mortar/Black Walnut

Coehorn style Mortar. Ready to shoot! Golf ball size bore. The base is black walnut with no stain. Spar urethane finish to show natural color and beauty of the Black Walnut. The base measures approximately  5.5” X 10.75” X 3” tall. (Base measurements may vary by a 1/2” on the width, depending on the wood that is available at the time of manufacture)The barrel is turned from solid 1018CRS 3” X 5.75” with a bore of 1.720” (golf ball)X 3.75” deep. There is a 1” x 1” powder pocket or breach with an 1/8 fuse hole. The barrel and all hardware is painted with flat black enamel.  Weighs 13lbs Made in USA!!!! Packs a good punch for a little mortar!


Note on color of base: Color will vary on the Black Walnut. I don’t use stain on these, so the color is dependent on the tree is was cut from.

Coehorn Mortar/Black Walnut
$400.00

Coehorn Mortar/

Golfball Bore/

Barrel Only

Free shipping! Coehorn style Mortar. Ready to shoot! Golf ball size bore. The barrel is turned from solid 1018CRS 3” X 5.75” with a bore of 1.720” (golf ball)X 3.75” deep. There is a 1” x 1” powder pocket or breach with an 1/8 fuse hole. The trunnion is 1” dia. X 4-1/2” wide. The barrel is painted with flat black enamel.  Weighs 7lbs. Made in USA!!!! Packs a good punch for a little mortar!

Coehorn Mortar/Barrel only
$180.00

Coehorn Mortar/

Soda Can Bore/

Complete with Base

Coehorn style Mortar. Ready to shoot! Soda/Beer can size bore. The barrel is turned from solid 1018CRS 4-1/2” dia. X 8-3/4” long, with a bore of 2.630” (Soda/Beer can)X 5-1/4” deep. There is a 1-1/2” dia x 1-1/2” deep powder pocket/breach with an 1/8 fuse/vent hole. The trunnion is 1-1/2” die diameter X 6-1/2” wide. The barrel is painted with flat black enamel.  Weighs 23lbs. The base is oak with Dark Walnut stain. Spar urethane finish to show natural color and beauty of the Oak. The base measures approximately 9-1/4” X 16” X 4” tall. (Base measurements may vary by a 1/2” on the width, depending on the wood that is available at the time of manufacture) 

Total Weight: 44lbs

Made in USA!!!! 

Note on color of base: Color will vary slightly, depending on the batch of wood.

Current lead time is 2-3 weeks.

Coehorn Mortar/Soda-beer can Bore/Complete with Base
$875.00

Coehorn Mortar/

Soda Can Bore/ Barrel Only

Coehorn style Mortar. Ready to shoot! Soda/Beer can size bore. The barrel is turned from solid 1018CRS 4-1/2” dia. X 8-3/4” long, with a bore of 2.630” (Soda/Beer can)X 5-1/4” deep. There is a 1-1/2” dia x 1-1/2” deep powder pocket/breach with an 1/8 fuse/vent hole. The trunnion is 1-1/2” die diameter X 6-1/2” wide. The barrel is painted with flat black enamel.  Weighs 23lbs. Made in USA!!!! 

Current lead time is 2-3 weeks.

Coehorn Mortar/Soda-beer can/Barrel only
$425.00